T Slot Measurement

  • Products
    • Linear Robotics

      LINEAR ROBOTICS

      Multi-axis automation products including H-Bots, T-Bots, Gantries, and Cartesian Robots. Motion solutions for every market.

      CHOOSE YOUR ORIENTATION

    • Belt Driven Actuators

      BELT DRIVEN ACTUATORS

      Linear actuators offer horizontal and vertical motion with travel up to 500 feet, speeds up to 600 in/sec., and can accurately handle loads up to 10,000 lbs.

      CHOOSE YOUR MODEL

    • Screw Driven Actuators

      SCREW DRIVEN ACTUATORS

      Simple and economical, screw driven actuators are highly modifiable for different applications and perfect for lighter loads and high accuracy positioning.

      CHOOSE YOUR MODEL

    • Specialty Actuators

      SPECIALTY ACTUATORS

      Engineered Products for Specific Applications.

      CHOOSE YOUR MODEL

    • Robotic Transport Units

      Robotic Transport Units

      Using a novel, flexible belt based “rack and pinion” design and structural aluminum MacFRAME components, our Robotic Transport Units (RTU) can handle a wide variety of lengths and payloads.

      CHOOSE YOUR MODEL

    • Gearboxes, Tools,
      Sensors &
      Replacement Parts

Width of tongue used with the T-Slots will be found in the complete standard, B5.1M. Throat dimensions are basic. When slots are intended to be used for holding only, tolerances can be 0.0 + 0.010 inch or H12 Metric (ISO/R286); when intended for location, tolerance can be 0.0 + 0.001 inch or H8 Metric. Top Five Useful Knots for camping, survival, hiking, and more - Duration: 10:47. Nature Reliance Recommended for you.

Example of 80/20 T-slotted profiles, 10 and 15 series
Measurement

T-slot structural framing is a framing system consisting of lengths of square or rectangular extruded aluminum, typically 6105-T5 aluminium alloy, with a T-slot down the centerline of one or more sides. It is also known as 80/20 framing, after the company 80/20, Inc., one of the prominent T-slot framing brands, the name of which is based on the 80/20 principle. While there is no published standard defining this framing system, manufacturers have settled into two categories of product comprising several series each that is generally intercompatible across manufacturers.

Profiles[edit]

T-slot framing is divided into metric and fractional (imperial) categories. The T-slot is always centered along the long-axis of the piece. Pieces are available in each series with a square cross-section. Rectangular cross sections are available as well which measure x by 2x (where x is the defined width) - e.g. 40mx80mm for 40 series.

Profile
type
Profile
name
Profile
size
fractional10 series1'
15 series1.5'
metric20 series20 mm
25 series25 mm
30 series30 mm
40 series40 mm
45 Series45 mm

T Slot Nut Measurement

See also[edit]

References[edit]

Mill T-slot Measurements

Retrieved from 'https://en.wikipedia.org/w/index.php?title=T-slot_structural_framing&oldid=944715673'